Renault Clio Sport

Renault Clio Sport 197 F4R830 Inlet Manifold for ZX12R Throttle Bodies

Renault Clio Sport 197 F4R830 Inlet Manifold for ZX12R Throttle Bodies

Renault Clio Sport 197 F4R830 Inlet Manifold for ZX12R Throttle Bodies
An inlet manifold for fitment to the Renault Clio Sport 197 F4R830 2.0 16v engine. The runners on this manifold are to suit the Kawasaki ZX12R throttle bodies with 54mm outside diameter and 46mm inside diameter, spaced at 90-90-90mm. This particular manifold incorporates a specially profiled plate on the inlet side to closely match the cloverleaf shape of these throttle bodies where the injector cutout is incorporated (see photos). A 54mm silicone hose can be used to mount the throttle bodies (please see our fitting kit range). Please check that this is correct for your throttle bodies prior to purchasing this manifold.

If in doubt please ask. Not suitable for ZX10R or ZX14R - see our other items for these applications. Ideal for anyone who has already sourced a set of ZX12R Throttle Bodies for their F4R830 engined project. With this manifold the standard bike fuel rail, injectors and throttle linkages can be retained - the bodies can simply be bolted on without modification. The manifold includes a single connection for the brake servo - this can be blanked off if not required, please advise when ordering.

The design of this manifold is such that the throttle bodies are angled upwards to aid clearance to the bulkhead - see the technical drawing for further information. When purchasing if you are unsure please advise us of the throttle bodies to be used and their inner and outer diameters at the manifold end. This will enable us to make the manifold to best suit your application. If you do not see a manifold to match the dimensions of your throttle bodies please ask - there are many variations of ZXR (and other bikes) but we CAN make the manifold! We also offer velocity stack kits for these throttle bodies as well as air filter packages, fluoro silicone fitting kits, injector connectors and much more! Note: If your vehicle is a drive-by-wire operated throttle it will need to be converted to a cable system to run ITB's or carbs. Our customer service is available 24 hours a day. Thank you for your interest in our company, we hope that you will be satisfied with the service and quality of our products!

Check availability with our specialists. The item "Renault Clio Sport 197 F4R830 Inlet Manifold for ZX12R Throttle Bodies" is in sale since Tuesday, December 19, 2017.

This item is in the category "Vehicle Parts & Accessories\Car Parts\Engines & Engine Parts\Other Engines & Engine Parts". The seller is "dansteng" and is located in Shipley.

This item can be shipped worldwide.

  • Brand: danST Engineering
  • Manufacturer Part Number: F4R830-ZX12R-001
  • Other Part Number: F4R830-ZX12R-001
  • Country/Region of Manufacture: United Kingdom


Renault Clio Sport 197 F4R830 Inlet Manifold for ZX12R Throttle Bodies