Renault Clio Sport Racing Blue (J45) - Professional Paint (Basecoat / Cellulose / 2K Direct Gloss). Mixed to order for Renault Clio Sport - Racing Blue - J45. Choose your paint type, size, and (where applicable) Neat (Unthinned) or Ready For Use (Thinned).
Choose Your Paint Type (Variation Options). Available as Neat (Unthinned) or Ready For Use (Thinned). Requires clear lacquer to achieve gloss and protection (basecoat dries matt by design). Available as Neat (Unthinned) or Ready For Use (Thinned).
Does not require lacquer (can be polished once fully cured). Best applied in good weather conditions (warm, dry, low humidity) for best flow and finish.
Professional high-gloss finish - hardener required. Does not require lacquer (gloss and durability are built in). Optional hardener add-on: supplied at half the paint volume.
250ml hardener / 1L paint? 500ml hardener / 2.5L paint? Note: Basecoat and Cellulose offer Neat or Ready For Use (Thinned). 2K Direct Gloss offers an optional hardener add-on. This paint is best applied using a spray-gun for the most accurate colour match and finish.
Surface Prep: Ensure the panel is clean, dry, degreased, and properly keyed. Test Spray: Always spray a small test piece first to confirm colour before full application. Coats: Apply light even coats, allowing flash-off time between coats.Basecoat: After coverage is achieved, allow correct flash-off then apply a suitable clear lacquer. Cellulose: Works best in warm, dry conditions. Avoid cold/damp weather for best results. 2K Direct Gloss: Requires hardener and should be mixed/used within its pot-life.
Tip: Metallic colours can look different depending on gun setup, air pressure, distance, and coat technique-always follow consistent spraying technique. Basecoat needs lacquer to achieve gloss and durability. Cellulose and 2K Direct Gloss do not require lacquer. 2K Direct Gloss requires hardener (optional add-on as described above). Colours can vary due to application method, substrate colour, existing paint fade, and previous repairs. Need help choosing the right option? Message us with what you're painting (panel/part) and what equipment you're using (spray-gun setup), and we'll point you to the best choice.